iptvru Posted November 17, 2021 Share Posted November 17, 2021 ?? Link to comment Share on other sites More sharing options...
FourMatt Posted November 22, 2021 Share Posted November 22, 2021 Merci Link to comment Share on other sites More sharing options...
rabatflix Rare Rare Posted November 23, 2021 Share Posted November 23, 2021 Thanks Link to comment Share on other sites More sharing options...
xcv77 Posted November 23, 2021 Share Posted November 23, 2021 great job Link to comment Share on other sites More sharing options...
Fareusz Posted November 25, 2021 Share Posted November 25, 2021 Mega thanks Link to comment Share on other sites More sharing options...
Ciacrack Posted November 26, 2021 Share Posted November 26, 2021 Le 09/03/2021 à 19:41, kurosaki ichigo a dit : So I see people having trouble with Wordlist Types. First of all let’s define what a Wordlist Type is. If you go to your OpenBullet 2 folder, and then to the UserData folder you will see a file called Environment.ini Open it and you will see a bunch of wordlist types, for example this one Hidden Content Donnez votre réaction ou répondez à ce sujet pour voir le contenu caché. si vous rencontrez des problèmes pour visualiser ce contenu, voir. ICI The wordlist type defines how the data lines from your wordlist will be separated and assigned to variables in your config. For example in this case your line will be separated into 2 slices (USERNAME and PASSWORD) using a colon : as separator. You will then be able to use input.USERNAME and input.PASSWORD in your config in order to access those pieces of data. While in the debugger, you need to select the correct Wordlist Type in order to split your test data. In the config settings you can configure the supported wordlist types (you need to match the one you used when you made the config) Please do not add wordlist types that aren’t supported by your config, otherwise it will cause issues! After doing this, you need to import a wordlist with THE SAME WORDLIST TYPE of the config you want to run, in this case Credentials Finally just create a job and select the config and the wordlist and it will run properly. Let me know if you have any doubts and I will try to explain it better! Ruri Source : https://discourse.openbullet.dev/t/comprehensive-guide-to-wordlist-types/435 thank you Link to comment Share on other sites More sharing options...
drare094 Posted November 28, 2021 Share Posted November 28, 2021 good thank you a lot for this share Link to comment Share on other sites More sharing options...
Snooper Posted November 29, 2021 Share Posted November 29, 2021 Than'ks Link to comment Share on other sites More sharing options...
entity Posted December 1, 2021 Share Posted December 1, 2021 tanghiu Link to comment Share on other sites More sharing options...
maxled Posted December 4, 2021 Share Posted December 4, 2021 thnx Link to comment Share on other sites More sharing options...
kobra Rare Rare Posted December 6, 2021 Share Posted December 6, 2021 Thank You Very Much For Your Work. Link to comment Share on other sites More sharing options...
hondeczka Posted December 6, 2021 Share Posted December 6, 2021 On 3/9/2021 at 7:41 PM, kurosaki ichigo said: Widzę więc, że ludzie mają problemy z typami Wordlist. Przede wszystkim zdefiniujmy, czym jest typ listy słów. Jeśli przejdziesz do folderu OpenBullet 2, a następnie do folderu UserData zobaczysz plik o nazwie Środowisko.ini Otwórz go, a zobaczysz kilka typów listy słów, na przykład ten Ukryta zawartość Daj odpowiedź i odpowiedz na ten temat, aby zobaczyć ukrytą zawartość. jeśli masz problemy z przeglądaniem tej treści zajrzyj TUTAJ Typ listy słów określa, w jaki sposób wiersze danych z listy słów będą oddzielane i przypisywane do zmiennych w konfiguracji. Na przykład w tym przypadku wiersz zostanie podzielony na 2 plasterki (NAZWA UŻYTKOWNIKA i HASŁO) za pomocą dwukropka jako separatora. : Następnie będziesz mógł użyć i w swojej konfiguracji, aby uzyskać dostęp do tych fragmentów danych. Będąc w debugerze, musisz wybrać poprawny typ listy wordlist, aby podzielić dane testowe. input.USERNAMEinput.PASSWORD W ustawieniach konfiguracji możesz skonfigurować obsługiwane typy listy słów (musisz dopasować ten, którego użyłeś podczas config) Nie dodawaj typów list słów, które nie są obsługiwane przez twoją konfigurację, w przeciwnym razie spowoduje to problemy! Po wykonaniu tej czynności musisz zaimportować listę słów z TYM SAMYM TYPEM LISTY SŁÓW konfiguracji, który chcesz uruchomić, w tym przypadku Poświadczenia Na koniec po prostu utwórz zadanie i wybierz konfigurację i listę słów, a będzie działać poprawnie. Daj mi znać, jeśli masz jakieś wątpliwości, a ja postaram się to lepiej wyjaśnić! Ruri Źródło : https://discourse.openbullet.dev/t/comprehensive-guide-to-wordlist-types/435 dzieki Link to comment Share on other sites More sharing options...
henry2001 Rare Rare Posted December 8, 2021 Share Posted December 8, 2021 Thanks Link to comment Share on other sites More sharing options...
Kabal22 Rare Rare Posted December 14, 2021 Share Posted December 14, 2021 thxx Link to comment Share on other sites More sharing options...
briza Rare Rare Posted December 20, 2021 Share Posted December 20, 2021 thanks Link to comment Share on other sites More sharing options...
neudega Posted December 27, 2021 Share Posted December 27, 2021 Il 9/3/2021 at 19:41, kurosaki ichigo dice: Quindi vedo persone che hanno problemi con i tipi di elenchi di parole. Prima di tutto definiamo cos'è un tipo di elenco di parole. Se vai nella cartella OpenBullet 2 e poi nella cartella UserData vedrai un file chiamato Environment.ini Aprilo e vedrai una serie di tipi di elenchi di parole, ad esempio questo Contenuto nascosto Dai una reazione o rispondi a questo argomento per vedere il contenuto nascosto. se hai problemi a visualizzare questo contenuto perfavore guarda QUI Il tipo di elenco di parole definisce come le linee di dati dal tuo elenco di parole verranno separate e assegnate alle variabili nella tua configurazione. Ad esempio in questo caso la tua riga verrà separata in 2 sezioni (USERNAME e PASSWORD) utilizzando i due punti :come separatore. Sarai quindi in grado di utilizzare input.USERNAMEe input.PASSWORDnella tua configurazione per accedere a quei pezzi di dati. Mentre sei nel debugger, devi selezionare il tipo di elenco di parole corretto per dividere i dati del test. Nelle impostazioni di configurazione puoi configurare i tipi di elenchi di parole supportati (devi corrispondere a quello che hai usato quando hai effettuato la configurazione) Per favore non aggiungere tipi di elenchi di parole che non sono supportati dalla tua configurazione, altrimenti causeranno problemi! Dopo aver fatto ciò, è necessario importare un elenco di parole con LO STESSO TIPO DI LISTA DI PAROLE della configurazione che si desidera eseguire, in questo caso Credenziali Alla fine basta creare un lavoro e selezionare la configurazione e l'elenco di parole e verrà eseguito correttamente. Fatemi sapere se avete dei dubbi e cercherò di spiegarvelo meglio! Ruri Fonte : https://discourse.openbullet.dev/t/comprehensive-guide-to-wordlist-types/435 tks Link to comment Share on other sites More sharing options...
giako Rare Rare Posted December 29, 2021 Share Posted December 29, 2021 grazie Link to comment Share on other sites More sharing options...
AstroBoy Rare Rare Posted December 29, 2021 Share Posted December 29, 2021 gg Link to comment Share on other sites More sharing options...
asljd Rare Rare Posted December 31, 2021 Share Posted December 31, 2021 need mac wordlist type Link to comment Share on other sites More sharing options...
alleluia123 Rare Rare Posted January 3, 2022 Share Posted January 3, 2022 thanks it help Link to comment Share on other sites More sharing options...
nishi Posted January 4, 2022 Share Posted January 4, 2022 thanks, let me try Link to comment Share on other sites More sharing options...
bendeng Posted January 4, 2022 Share Posted January 4, 2022 Thanks man. Link to comment Share on other sites More sharing options...
MaNYaK97 Rare Rare Posted January 4, 2022 Share Posted January 4, 2022 thank you a lot for this share brate Link to comment Share on other sites More sharing options...
Rat23423 Posted January 8, 2022 Share Posted January 8, 2022 thank you a lot for this share Link to comment Share on other sites More sharing options...
RigtTackle Rare Rare Posted January 8, 2022 Share Posted January 8, 2022 thanks a lot Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now